Miért váltja fel a LED háttérvilágítású fényvezető lemez lézeres pontozása a selyemszita fényvezető lemezt?

Mar 30, 2022

A háttérvilágítási modul a folyadékkristályos kijelző fényforrása. Maga az LCD nem bocsát ki fényt. A háttérvilágítási modul fényforrásának teljesítménye határozza meg a kijelző vizuális érzékelését. A fényvezető lemez a háttérvilágítási modul fényforrásának átviteli közege. Pontelrendezése, alakja és anyagösszetétele meghatározza a kimenő fényforrás fényerejének, eloszlási egyenletességének és fénykibocsátásának hatékonyságát. A fényvezető lemez a kulcsa a LED-es háttérvilágítási modulnak. alkatrészek. Meghatározza a fényhatásfokot és a fény egyenletességét.


TV light guide factory


LED-es háttérfényforrás, a fő alkotóelem a fényvezető lemez, más néven fény{0}}kibocsátó lemez, akrilból (PMMA) vagy PC-ből vagy PS anyagból áll, gyártási módszerei a következők?


1. Lézeres pontozás


Az úgynevezett -lézeres szpotálás egy lézeres spotting gép használata. A fizikai alapelv általában az, hogy nagy-fényerejű LED-es lámpagyöngyöket kell felszerelni egy nagy-átlátszóságú akrillap oldalára bizonyos vastagsággal, és a fény, például a LED-ek, az akrillap belsejében hajtogatva, egy bizonyos eltérési szög. Amikor a fény az akril hátoldalán elosztott és CO2 (szén-dioxid) lézerrel maratott lézerpontokra sugárzik be, diffúz visszaverődést és fénytörést okoz, így a fény egyenletesen oszlik el a fényvezető lemezen. Előnyei: jó hatás, hosszú használati idő, egyszerű folyamat


  Second, open mold light guide plate


  The so-called open-mould light guide plate is a light guide plate with bumps formed by injection molding with a pre-designed mold by an injection molding machine.


  Three, silk screen light guide plate


 The so-called screen printing light guide plate is through the screen printing machine, adding ink and screen printing screen frame, screen printing on the acrylic surface to form dot-shaped ink dots.


  Analysis of the reasons why the laser spotting of the light guide plate will gradually replace the silk-screened light guide plate?


  Nowadays, more and more light guide plate manufacturers choose to use laser dots to make light guide plates. Why?


  First, the process of silk-screening the light guide plate is complicated. The acrylic sheet needs to be printed on the screen and ink, and then dried through the screen printing tunnel furnace to become the dot light guide plate. Among them, the production time period of the stencil is relatively long, usually takes a week, and each link requires manual operation.


  Second, environmental pollution is large. The production of silk-screen light guide plates requires ink, but ink is the biggest source of pollution in the printing industry. Because it is an organic volatile compound, it will form oxides and photochemical smog under sunlight, and the smell is particularly strong and pungent. Long-term operation may affect people's health.


  Third, it is easy to yellow and has a short lifespan. Since the heat generated by the LED during the lighting process will affect the ink, the ink dots will affect the emission of light, resulting in the phenomenon of light decay, which will eventually lead to uneven light or yellowing of the LED panel light, and the use time is not long.


  To sum up, the advantages of using the light guide plate laser marking machine for marking are gradually emerging, and more and more people use the light guide plate laser marking machine to make the light guide plate!


Akár ez is tetszhet